So my fridge stopped making ice and water is no longer coming out of the dispenser. I looked online and it seems like it's always either the line or the water valve.
So my fridge runs the water from the wall to a filter, back down to the water valve and then to the water and ice dispensers.
I checked the psi and it's good.
I checked the connector hose and it's clean but I can't blow through the hose from the supply to the filter. I have the filter plug installed so if I remove the plug I can blow through it.
If I push the water dispenser button I can hear the electrical motor sound like it always made. I don't have a voltmeter to check if it's my water valve.
We've always had very low pressure, (even when it was brand new) with water coming out of the dispenser when using a filter. We decided to use the bypass plug because it was the only way to get water out of the dispenser. Now I can't even blow through the line unless I remove the plug.
Would I not be able to blow through it if the valve was bad? Or is the problem with the filter if I can't blow through it with the filter plug installed?
Appreciate any help or advice.
This is my fridge, water dispenser is inside, filter is top right hand corner of the fridge
Submitted October 11, 2016 at 08:48PM by Tattoomyvagina http://ift.tt/2dtzMS2 fixit
No comments:
Post a Comment